arrow_back
Software
CSI_ETABS_Ultimate_20.0.0_Build_2760_x64_Downloadly.ir
Etabs V20 installation tutorial
Etabs V20 Installation Process
Course details
course outline
Modeling using Grid system in Etabs
Introductuion to structural plan
G+2 Structural plan
Defining grid data
Defining material and section properties
Drawing Column and beam
Drawing slabs
Defining story data & Complete Structural modeling
Elevation and rendered view
Modeling using centerline plan
G+12 Mumbai
Introduction to architecture,structural and centerline plan
Importing centerline plan into Etabs
Defining story data
defining material and section properties
Drawing columns and understanding differences column & shear wall
drawing shear wall
Assigning beam section properties
Drawing slabs
Checking Structural model & Correcting modeling mistakes
Complete structural modeling modeling
Understanding degree of freedom, Supports and it's types, Assigning Supports in Etabs
Manual calculation and application external loads as per IS Codes
Understanding types of loads acting on building
Manual calculation of Super-dead load using IS 875(Part-1)
IS 875(Part-1)
Manual calculation of Live load using IS 875(Part-2)
IS-875_2
Super-dead load calculation
Application of Super-dead & live load on residential floors in Etabs
Application of Super-dead & live load on terrace floor
Application of Super-dead & live load on OHWT
Excel sheet - Load calculation For OHWT & LMR
Application of wall loads on beams
Understanding End releases concept
End releases
Manual calculation of Static wind load using IS 875(Part-3)
Excel sheet for wind load calculation
Application of static wind load in Etabs as per IS 875(Part-3)
IS-875-part-3-2015
Understanding behavior of building due to action of wind forces
Manual calculation of Static seismic forces as per IS 1893 (Part-1)
IS 1893(Part-1)2016
Excel sheet for seismic force calculation
Application of Static earthquake loads as per IS 1893:2016 (Part-1)
Understanding behavior of building due to action of static earthquake forces
Application of dynamic earthquake force in Etabs using IS 1893 (Part-1)
Understanding Load combinations as per IS codes
Studying bending moment and shear force in beams
Studying bending moment and shear force in columns
Studying bending moment and shear force in shear wall & slabs
Building stability checks as per Indian codes
Understanding structural stability against external forces
Stability checks for building as per indian codes
Check for deflection in slab due to dead + Live load as per IS 456:2000
IS 456-2000
Stability check due to action wind loads as per IS 16700:2017
Stability check due to action earthquake loads as per IS 16700:2017
IS-16700-2017
check for story drift due to action earthquake loads as per IS 1893:2016
Stability check for 1st Mode of vibration
Stability check for fundamental time period (Part-1)
Stability check for fundamental time period (Part-2)
Stability check for total modal mass in First three modes as per IS 1893:2016
Stability check for No of modes to be considered as per IS 1893:2016
Stability check for rebar percentage in columns as per IS 456:2000
Stability check for rebar percentage in beams as per IS 456:2000
Stability check for reinforcement in shear wall as per IS 13920:2016
Manual design of structural members
Beam
Slab
Column
Certificates